最新公告:
当前位置:首页-新闻动态>>公司公告>>不干胶标签脱落原因分析及粘贴技巧

不干胶标签脱落原因分析及粘贴技巧

来源:http://www.njhxsfs.com/ 日期:2019-06-27 发布人:admin   在客户那里经常看到不干胶标签松动或边缘翘起,或者反应不干胶不好,其实不干胶标签除了自身的粘性外,还与环境、用户粘贴技巧也有一定的关系。
  Customers often see stickers loosening or edge warping, or poor response to stickers. In fact, stickers are not only sticky, but also related to the environment and user sticking skills.
  贴纸脱落的原因有以下几点:
  The reasons for the decals falling off are as follows:
  胶水本身不太好
  The glue itself is not very good.
  2. 环境潮湿
  2. Wet environment
  3、粘贴时间过长,导致胶水过期
  3. The glue will expire due to the long time of pasting.
  4、用户粘贴不规范,可只粘贴部分或不压紧。
  4. User paste is not standard, can only paste part or not compact.
  激光标签制作厂家:不干胶标签脱落原因分析及粘贴技巧
  Manufacturer of Laser Label: Cause Analysis and Pasting Skills of Non-adhesive Label Falling off
  如果出现以上原因,用户可以考虑从以下几个方面来解决问题
  If the above reasons arise, users can consider the following aspects to solve the problem
  1、应选用合适的胶水材料;
  1. Proper glue material should be selected.
  2、选择不干胶:选择不干胶时,首先要确定所生产的不干胶标签所要求的不干胶是永久性的还是可拆卸的,是粘贴的还是翻新的,而商品对于干燥的不干胶标签是否有特殊的化学特性要求。例如,在标注大曲面(直径小于2cm的圆形衬底,如下图所示)时,表面材料不应使用厚纸或硬纸材料(如镜面涂布纸)。应使用薄膜或软纸材料和高初始粘度的粘合剂。对于需要热灌装的容器,粘胶材料的表面材料应选用薄膜材料和具有良好初始粘度的粘胶剂;
激光标签制作厂家
  2. Choosing non-drying glue: When choosing non-drying glue, first of all, we should determine whether the non-drying glue required by the label is permanent or removable, whether it is pasted or refurbished, and whether the goods have special chemical characteristics for the dry non-drying glue label. For example, when marking large curved surfaces (circular substrates less than 2cm in diameter, as shown in the figure below), the surface material should not use thick paper or cardboard materials (such as mirror coated paper). Thin film or soft paper materials and high initial viscosity adhesives should be used. For containers requiring hot filling, the surface materials of viscose materials should be film materials and adhesive with good initial viscosity.
  激光标签制作厂家:不干胶标签脱落原因分析及粘贴技巧
  Manufacturer of Laser Label: Cause Analysis and Pasting Skills of Non-adhesive Label Falling off
  3,在选择标签的表面时,我们应该考虑是否标注对象是一架飞机或一个表面,无论是大直径和小直径,无论是一个表面或一个球体,它是否是一个刚体或可压缩变形,这些指标的选择有直接的关系。软瓶应由软材料制成,如PE、PVC、拉伸PP和PE/PP复合材料。对于硬瓶体,可以考虑PET、BOPP和PS材料。
  3. When choosing the label surface, we should consider whether the label object is an aircraft or a surface, whether it is a large diameter or a small diameter, whether it is a surface or a sphere, whether it is a rigid body or compressible deformation, the choice of these indicators is directly related. Soft bottles should be made of soft materials such as PE, PVC, tensile PP and PE/PP composites. For hard bottles, PET, BOPP and PS materials can be considered.
  以上现象只是不干胶标签常见的几种故障及解决办法,在实际工作中有很多原因需要进行探究和分析。想要了解更多,欢迎点击我们网站:http://www.njhxsfs.com
  The above phenomena are only several common failures and solutions of sticker labels. There are many reasons to be explored and analyzed in practical work. For more information, please click on our website: http://www.njhxsfs.com.

上一篇:带你了解复合纸不干胶的及印刷工艺的改进
下一篇:食物标签看这五点帮助你更好地识别食物标签
联系我们
秒速时时彩官网 重庆欢乐生肖开奖直播 重庆欢乐生肖开奖直播 欢乐生肖开奖结果 欢乐生肖 重庆欢乐生肖走势图 欢乐生肖开奖结果 欢乐生肖开奖记录 秒速时时彩官网 重庆欢乐生肖开奖结果