开心彩票网

最新公告:
当前位置:开心彩票网-常见问题解答>>激光标签制作厂家:汽车标签纸怎样贴不起气泡

激光标签制作厂家:汽车标签纸怎样贴不起气泡

来源:http://njhxsfs.com/ 日期:2019-06-06 发布人:admin   激光标签制作厂家:汽车标签纸怎样贴不起气泡
  Manufacturer of Laser Label: How Can Car Label Paper Not Stick Bubbles
  目前市面大尺寸汽车标签纸,普通带有一层透明膜,小尺寸普通不需求透明膜,撕下直接粘贴即可。
  At present, large-size automobile label paper on the market usually has a transparent film, and small-size ordinary does not need transparent film, tear off and paste directly.
  但是怎样粘贴才会不起气泡呢,这是很多爱车的朋友都十分关怀的问题。
  But how to paste it without bubbles? This is a problem that many car-loving friends are very concerned about.
  1、首先清洗车身,抹洁净,坚持枯燥。汽车标签纸粘贴过程尽量在室内停止,防止在室外灰尘粘贴在贴纸上。
  1. First, clean the car body, wipe clean, insist on boring. The sticking process of automobile label paper should be stopped indoors as far as possible to prevent dust from sticking on the sticker outside.
  2、其次检查贴纸完好并肯定好贴纸位置,粘贴之前往粘贴部位平均的喷洒一层水(运用带有喷嘴的工具),我们行业叫做水贴法,其作用是减少在粘贴过程起气泡的几率,并且关于不理想的粘粘位置可再次挪动。
  2. Second, check that the sticker is in good condition and confirm the position of the sticker. Before pasting, spray an average layer of water on the sticker (using the tool with nozzle). Our industry is called water pasting method. Its function is to reduce the probability of bubbles in the pasting process, and the unsatisfactory sticking position can be moved again.
  激光标签制作厂家
  Manufacturer of Laser Label
                                 激光标签制作厂家
  3、再次先把透明膜(连同贴纸)一边扯开,固定好位置先从一边贴上去,同时用布或者塑料卡刮平外表,边贴边抹平边撕底纸,直到贴完,若在粘贴中途呈现大量气泡可重新撕起来再贴。
  3. Pull the transparent film (together with the sticker) apart at the same time, fix it on one side, scrape the surface with cloth or plastic card, and tear the base paper at the same time, until it is finished. If there are a lot of bubbles in the middle of the sticker, it can be re-torn up and then pasted.
  4、汽车标签纸全部贴好后,再用布或者塑料卡重复向边缘刮压有气泡部位,由于贴纸与车身外表之间有层水汽并未完整粘牢,刮压时气泡很容易溢出。
  4. After all the automobile label paper is affixed, the air bubbles are repeatedly scraped to the edge with cloth or plastic card. Because there is a layer of water vapor between the sticker and the outside of the automobile body, the air bubbles easily overflow during scraping.
  激光标签制作厂家:汽车标签纸怎样贴不起气泡,若粘贴位置不理想,可渐渐挪动贴纸的位置到合适,同样道理,贴纸与车身之间有层水汽此时并未完整粘牢。等候大约半个小时,待贴纸与车身之间的水完整枯燥后贴纸会自动粘牢,把透明膜撕下即可。
  Laser label manufacturer: How can the automobile label paper not stick bubbles? If the sticking position is not ideal, it can gradually move the position of the sticker to the right place. Similarly, there is a layer of water vapor between the sticker and the car body, which is not completely adhered at this time. Waiting for about half an hour, when the water between the sticker and the car body is completely dry, the sticker will automatically stick and tear off the transparent film.

上一篇:山东透明不干胶标签印刷中常用哪些粘胶剂?
下一篇:透明不干胶标签卷筒孔位偏差怎么处理?
联系我们